Komatsu — CHECK AND ADJUST TRACK TENSION

. MAINTENANCE SERVICE PROCEDURE CHECK AND ADJUST TRACK TENSION INSPECTION ADJUSTMENT WARNING Grease inside the adjusting mechanism is under high pressure. distributor for repairs. 4 - 29 The wear of pins and bushings on the under carriage will var y with the working conditions an d types of soil. It is thus necessary to co ntinually inspect the track te nsion so as to maintain the standard tension. Carry out the ch eck and adjustment under the same conditions becomes clogge d with mud, measure with t he track clogge d with Stop the machin in FORWARD with out applying the brake).

Th en place a strai ght bar on the track shoe s between the carrier roller and the idler as shown in the figure, and measure the clearance be tween the bar a nd the grouser at the m idpoint. If the clearance (A ) is 20 to 30 mm (0.79 to 1.18 in), the te If the track tens following manne Grease coming fr om plug (4) under pressure can penetrate th causing injury or d one turn. Do not lo eath. For this reason, do not l osen any part other than plug oosen plug (4) more than (4). Furthermore, do not bring your face in If track tension is front of the grease fitting. not relieved by this procedure, contact your Komatsu