Komatsu — CHECK AND ADJUST TRACK TENSION

. MAINTENANCE SERVICE PROCEDURE NOTICE 4 - 30 WHEN INCREASIN 1. First remove the bolt (1) and then remove the cov When removing cover (2), be careful not to let an y dirt get inside. There is a safet y label stuck t o th e back of cover (2). Be c areful not t o damage the safety 2. Pump in gre ase through the greas e fitting (3) with a grease pump. 3. To check tha t the correct tension h as bee n achiev ed, move the machine backwards and f 4. Check the tr ack tension again, and if the t ension i s not correct, adjust it a gain 5.

Continue to p ump in grease u ntil S become s 475 m m (18.7 in If the tension is still loose , the pin a nd bushing are excessive worn, so th ey must be either tu contact your