Komatsu — ADJUST IDLER CLEARANCE

. MAINTENANCE SERVICE PROCEDURE ADJUST IDLER CLEARANCE backward under external (1) and guide plate is side play in the idler, or track to come off or resulting in ADJUSTMENT REMARK There are two types of shim (thickness: 0.5 mm (0.02 in) and 1.0 mm (0.04 in)). 4 - 33 The i dler move s forward and when worn. As t turns at an ang uneven wear, s le, causing t o adjust as fol pressure (2) become the idler 1. Drive the m achine for 8 to 12 m ( 24.4 to 36.6 ft) on fla t ground, then measu re clearance A (4 places: left , right, inside outside) between th e track frame and sid e guide (1). 2.

If clearance A is more tha n 3 mm (0.1 in) , remove bolt (3), then take out shi m (4), and adj ust to t hat t he clearance on one side is less than 0.5 mm (0.02