. MAINTENANCE SERVICE PROCEDURE If the bushing is worn, replace the hinge. CHECK DOOR LATCH WARNING 4 - 41 LUBRICATE DOOR If the d oor makes a squeakin g noise whe n it is opened or closed, spray l ubricant in th rough the split in the h inge bushing. It is qui te dangerous if the machine suddenly starts to move durin g the inspect ion work. Stop the engine a nd operate th e parking brake lever t o the LOCK ( L) position wit hout fail. Check he door open-locked, and check that there is still grease Hold t inside the latch. If t he amount of grease i s low or there i s no more grease , coat the ins ide of the latch with g rease from portion ( 1).
REMAR K e is no more grease inside the latch, the movement will If ther becom e poor becau se of dust inside the la tch, and the ha ndle may be stiff when openin g the doo r. CHECK DOOR LOCK STRIKER k striker exceeds 0.5 mm (0.02 in), If wear (A) of the d oor of loc mm (0.02 replac e the striker. I f it is used as it is, the p lay will increas e and this may re sult in break age of the hinge or do or lock.