Komatsu — REPLACE FUEL FILTER CARTRIDGE (MACHINES EQUIPPED WITHOUT ADDITIONAL FUEL FILTER CARTRIDGE)

. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL FILTER CARTRIDGE (MACHINES EQUIPPED WITHOUT ADDITIONAL FUEL FILTER CARTRIDGE) WARNING to remove it. 4 - 56 After the eng ine has been op erated, all parts ar e at high temperature, so do not replace the filter im mediately. Wait for all parts to cool down before starting the operation. High pressur e is generated i nside the engine f uel piping system When replac ing the filter, wa it for at least 30 seconds after stopping the engine to let the intern al pressure go down before replacing the Do not bring any fire or flame Be careful w hen opening the air bleed plug in the fuel filter head .

It is still under pressure, so fu NOTICE Genuine Ko matsu fuel filter cartridges use a special filter that h as highly efficient filtering abili ty. When replacing the filter cartridge, al ways use a genu ine Komatsu part . The common rail fuel injectio n system used o n this machine co nsists of more precise parts tha n the conventional injection pump and no zzle. If any part ot her than a genui ne Komatsu filter cartridge is used, dust or dirt may get in and cause problems with the injection system. Alw ays avoid using substitute parts. When carryin g out inspection or maintenance of the fuel system , pay more attention than norma l to the entry of dirt.

If dirt is stuck to any part, use fuel to wash it off comp letely. Container t o catch the oil Prepare a f ilter wrench 1. Set the co ntainer under t he filter cartridg e to catch the d oil. 2. Close valv e (1) of fuel st 3. Remove t After drain he drain plug a ing fuel, tighte t the bottom of n the drain plug 4. Using a fil ter wrench, tur n filter cartridge