. OPERATION MACHINE OPERATIONS AND CONTROLS Check Coolant Level, Add Coolant WARNING of If 3 - 77 Checks Before Always check the items in this se ction before st arting the engin e each Do not open the r adiator cap unles s necessary. Wh en checking the co olant, always wait for the engine to cool down and check the sub tank. Immediately afte r the engine is sto pped, the coolan t is at a high temperature and the radiator is under high internal pressure. If the cap is rem oved to check the coolant level in this condition, the re is a hazard of burns. Wait fo r the temperature to go down, then turn the cap slowly to release the press ure and remove it carefully. 1.
Open the righ t rear cover on the machine a nd check that th cooling water level is betwee n the FULL an d LOW marks o on the right). radiator sub t ank (1) (shown in the diagram If the water le vel is low, add w ater through the water filler of su tank (1) to the FULL level. the cap securely. y, there is probably leakage pair any problem immediately. 2. After adding c oolant, tighten the cap securel 3. If the sub-ta nk (1) is empt y, there is pro pair any proble coolant. After inspecting, re m immediately. there is no pr oblem, check t he coolant level in the radiator. the coolant le vel is low, add c oolant to the ra diator, then fill th sub-tank (1).
Drain Water And Sediment from Fuel Tank 1. Open the door at the right of the machine. 2. Set a container under the drain hose to catch the drained fu 3. Open drain valve (1) and drain the water and sedime accumulated at the bottom together with the fuel. 4. When no more water and sediment comes out with the fu close drain valve (1). 5. Close the door. 1. 2. 3. 4. 5. 1. Open the doo r at the right of 2. Set a contain er under the dra in hose to catc h the drained fu 3. Open drain valve (1) and drain the wat accumulated at the bottom to gether with the 4. When no mo close drain va 5. Close the doo