. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Engine Oil Pan, Add Oil WARNING the engine is stopped and may cause serious burns. Wait for the oil 2. Remove dipstick (G), and wipe the oil off with a cloth. 3. Fully insert dipstick (G) into filler pipe, then remove it. 6. If oil level is correct, securely tighten the oil filler cap and close the engine hood. REMARK When checking the oil level after the engine has been operated, wait for at least 15 minutes after stopping the engine before checking. If the machine is at an angle, make it horizontal before checking. 3 - 81 Parts temperature to go down before performing this operation. 1. Open the en 4.
The oil leve l should be between the (H) and (L) marks on I dipstick (G). f the oil leve l is below the (L) mark , add oil through oil filler (F). 5. I f the oil is a bove the (H) mark on t he gauge, remove cover (1), drain the ex cess oil from drain va lve (P) at the of the engine oil p an, then check the oil l evel again.