. MAINTENANCE MAINTENANCE PROCEDURE REMARK CHANGE OIL IN SWING MACHINERY CASE WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil hole (B), then turn the drain valve to the OPEN position. 7. Install air bleed plug (1). 4 - 70 Operate the ma chine after halting for more than 5 minutes t o eliminate bu bbles in the oil insi 12. Check for oi l leakage and wipe off any spilled emperature to go down before performing this operatio Refill, capacit y: 16.5 liters (4.36 US 1. Remove cov er (A) of the inspectio (Only demol ition specification ma 2.
Set a contai ner under drain valve (P) under th e machine body to catch the oil. n valve (P) under the body, drain the oil, then rain valve again. 3. Loosen drai ining the oil, first pull hose (2) out from inspection 4. Remove dip stick (G) and air bledi ng plug (1). 5. Add the repl acement amount of oi l through the insertion guide for dipstick ( 6. Check the o SWING MA