. MAINTENANCE MAINTENANCE PROCEDURE EVERY 5000 HOURS MAINTENANCE CHANGE OIL IN HYDRAULIC TANK WARNING the engine is stopped, and may cause burns. Wait for the NOTICE If the machine is equipped with a hydraulic breaker, the hydraulic oil will deteriorate much faster than during normal bucket operations. For details, see "MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER (PAGE 4-17)" when carrying out maintenance. tank. 4 - 83 Maintenance for every 5 0, 250, 500 and 1000 hours serv ice should be carried out at the s temperature to go down before starting the work. When removing the oil fi ller cap, turn it slowly to r elease the Refill, capacity: 188 lit ers (49.67 US gal) the socket wrench).
Prepare a handle (for 1. 2. 3. 1. Swing the upper stru cture so that hydraulic tank drain plug (P) and drain plug (A) at the bottom of the pum p suction tube are in the middle betwee n the left and right tracks. 2. Retract the arm and b ucket cylinders, then l ower the b oom and put the teeth in conta ct with the ground. the LOCK position and stop the engine. 3. Set the lock lever to the LOCK position and stop the 4. Remove the cap of o il filler port (F) at the t of the hydraulic