. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE on yourself. remove drain drained. SYSTEM (PAGE 4-44)". 4 - 84 5. Remove the underc 6. Set the oil containe e machine. Using the handle, re move drain plug (P), ( A) and d rain the oil. Check the O-ring in stalled to plug (P), (A), and if it i s damaged, replace the O-ring. After draining the oil, tig hten dr ain plug (P), (A). of drain plug (P) and (A) (6 to 8 kgm, 43.3 to 57.9 lbft) of drain plug (P) and (6 to 8 kgm, 43.3 to 57 areful n ot to get oil m of th hen tube. If they are rder, almost the same a mount of oil can be 7. Add the replacemen t amount of oil through oil filler (F).
Check that the oil level is bet ween the H and L l ines on the sight gauge (G) For details of oil lev el check, see "Check O il Leve l in Hydrauli c Tank, Add Oil (PAG 8. Install the undercov 9. Bleed the air from t For details of the me thod of bleeding the air from th e hydraulic c ircuit, see "BLEEDING AIR FROM HYDRAULIC