Komatsu — HYDRAULIC CIRCUIT

. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT tank to 6 - 12 4. Set the lock l ever to LOCK p osition (L) 5. Loosen fille hydraulic elimina te the internal pressu re in the h ydrauli c circuit. 6. Place a container under the filter elem ent to c atch the oil. 7. Remov e plug (3) from filter c ase (1) an d drain the oil. 8. Turn filt er cas e (1) to t he left t o remove i t, then take out element (2). Clean the removed parts, then install new element (2) and (4). installing, bring the case into contact with the filter then tighten a further 1/2 turns. 9. O-ring 10.

When brin case into conta holder, then ti ghten a further 1/2 turns. element (2)