. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENT REMOVAL AND INSTALLATION Attachment Removal to 6 - 13 1. Lower the attachment to the ground and stop the engine. 2. Turn the st arting switc h to th e ON position (B), then set the lock lever to the FREE position ( F). 3. After carryi ng out Step 2, operate eac h wo rk equipment control lever and a ttachment contro l pedal f ully t o the front, rear, left, and right 2 or 3 times within 15 seconds to release the internal pressure in the hydraulic 4. Set the loc k lever to L OCK position ( 5. F) o ydraulic tank eliminate t he internal pressure in the hydraulic circuit.