Appendix A • Parameter Listings Engine Data List The following table lists all data list parameters and their current values for the En- gine application. 142 Detroit Diesel Application User’s Manual Parameter Description ACTIVE CODES Indicates (Yes or No) whether an active Fault Code is present. AIR FILTR RS Indicates the relative amount of restriction measured at the Air Inlet Filter, inches of H O or KPa. 2 AIR INLET TMP Indicates the temperature of the air entering the engine air induction system in degrees Fahrenheit or Celsius. AIR INLET PSI Indicates the engine air inlet pressure in PSI or KPa.
AIR TMP TQ LIMIT Indicates the active/inactive status of the Air Temper- ature Engine Torque Reduction Mode. ALARM Indicates the status of the optimized idle alarm mode. ALERT MODE Indicates the active/inactive status of the idle shutdown Driver Alert Mode. ALT THROT CNTS (MARINE) Throttle counts. “N/A” will be displayed if the A/D port mask for Throttle Position is disabled as indicated by DDEC Unique ID 223. AMB AIR TMP Indicates the temperature of the air surrounding the vehicle in degrees Fahrenheit or Celsius. BARO PRS PSI Indicates the atmospheric pressure in PSI or KPa.
BOI Beginning of Injection - specifies the timing of the injection event as the number of degrees crankshaft rotation before piston TDC. BOOST PSI OR KPA Pressure of air measured downstream on the com- pressor discharge side of the turbo-charger. Indicated in PSI or KPa “FAIL” will display if a FMI 3 or FMI 4 is received. BYP VALVE Indicates the percent opening of the blower bypass valve. COMP BLEED Cylinder Boost Differential Pressure measures the difference between the Turbine Inlet Pressure and the Turbocharger Compressor Outlet Pressure.