Detroit Diesel — Engine Data List

DDEC Engine Parameters Detroit Diesel Application User’s Manual 143 Parameter Description COOL TMP Indicates the temperature of the engine coolant in degrees Fahrenheit or Celsius. COOLANT LEVEL Indicates the engine coolant level, determined by the Coolant Level Sensor. Will display FULL, ADD or LOW. Some engines may be equipped with an optional Second Coolant Level Sensor. COOLANT PSI OR KPA Indicates the engine coolant system pressure in PSI or KPa. CRNKCSE H20 OR KPA Indicates the air pressure inside the engine crank- case in inches of water or KPa. CRUISE SET MPH OR KPH Indicates the cruise control set speed. ECM VOLTS Indicates the battery voltage available to the ECM.

ECON MPG Indicates the current fuel economy at the current vehicle velocity. EGR DPS A* Differential pressure across the EGR flow measure- ment device. EGR DPS B* Differential pressure across the EGR flow measure- ment device. *EGR Parameters with “A” suffix pertain to ECM software versions below R33.0. EGR parameters with “B” suffix pertain to ECM software versions at or above R33.0. See parameter “SOFTWARE LVL” in the “Engine and Vehicle Configuration”, on page 150 EGR DPS CNTS Indicates the raw analog counts of the EGR orifice pressure drop. EGR TMP A* Temperature of the re-circulated exhaust gas after the EGR cooler.

EGR TMP B* Temperature of the re-circulated exhaust gas after the EGR cooler. *EGR Parameters with “A” suffix pertain to ECM software versions below R33.0. EGR parameters with “B” suffix pertain to ECM software versions at or above R33.0. See parameter “SOFTWARE LVL” in the “Engine and Vehicle Configuration”, on page 150 ENG BRAKE Indicates the active/inactive status of the engine brake. ENG BRAKE PCT Indicates the ratio of engine brake force to maximum brake force available.