Detroit Diesel — Engine Data List

DDEC Engine Parameters Detroit Diesel Application User’s Manual 149 Parameter Description TRB CMP IN Indicates turbocharger compressor inlet temperature in degrees Fahrenheit or Celsius. “FAIL” will display if FMI 3 or FMI 4 is received. TRB BYP VLV Turbocharger Compressor Bleed Valve, ON or OFF. FAULT is displayed when the output is switched OFF if the TRB BYP DP is too high, which will prevent unwanted exhaust gas recirculation. Displays “N/A” if not configured. T-STAT Indicates the status of the optimized idle thermostat control mode.

%TQ LIMIT Torque Reduction Factor - indicates the ratio of current output torque allowed (due to adverse operat- ing conditions) to maximum torque available at current engine speed (under normal operation conditions). TURBO SPEED Indicates the Turbo blade speed in RPM. VEHICLE SPD MPH Indicates the vehicle road speed in MPH or KPH. • VSG CNTS (STANDARD) • THROT CNTS (MARINE) Indicates the Variable Speed Governor (VSG) - A/D counts. For marine engines, indicates the main throttle counts. “N/A” will be displayed if the A/D port mask for PTO position is disabled as indicated by DDEC Unique ID 223.

• VSG SET RPM (STANDARD) • THROT SET RPM (MARINE) Indicates the engine set speed for the Variable Speed Governor. For marine engines indicates the throttle set speed.