Detroit Diesel — Engine Protection Configuration

DDEC Engine Parameters Engine Protection Configuration The following table lists all Engine Protection configuration parameters. NOTE: i “R1” parameters pertain only to multi-ECM engines, Receiver #1, MID 175. Detroit Diesel Application User’s Manual 157 Parameter Description OIL TMP Indication of the type of engine protection R1 OIL TMP Indicates the Receiver ECM #1 (MID 175) type of engine protection based on high engine oil tem- perature “N/A” will be displayed if the sensor input is not configured. COOLANT TMP Indication of the type of engine protection based on high engine coolant temperature.

INTRCOOL TMP Indication of the type of engine protection based on the engine intercooler coolant temperature. OIL PRS Indication of the type of engine protection based on low engine oil pressure. CRNKCSE PRS Indication of the type of engine protection based on engine crankcase pressure. COOLANT PRS Indication of the type of engine protection based on engine coolant pressure. R1 COOLANT PRS Indicates the Receiver ECM #1 (MID 175) type of engine protection based on engine Coolant Pres- sure. “N/A” will be displayed if the sensor input is not configured. COOLANT LVL Indication of the type of engine protection based on low coolant level.

OIL LEVEL Indication of the type of engine protection based on low engine oil level. AUX SHTDWN #1 Indication of the type of engine protection based on auxiliary engine shutdown #1. AUX SHTDWN #2 Indication of the type of engine protection based on auxiliary engine shutdown #2.