DDEC Engine Parameters Detroit Diesel Application User’s Manual 175 Parameter Range Description MIN CRUZ4 20 MPH to “MAX CRUZ SPD” MPH or N/A This is the lowest speed set for the cruise control. MAX CRUZ4 “MIN CRUZ SPD” to “VEHICLE SPD MPH” If “VEHICLE SPD LMT” = YES, “MIN CRUZ SPD” to RATED RPM VSS RATIO IF VEHICLE SPD LMT = NO This is the maximum speed at which the cruise control can be set. ⎞ ⎠ AUTO RESUME4 YES, NO or N/A Allows the cruise auto resume function to be enabled. CRZ SW VSG4 YES, NO or N/A Allows the cruise switched function to be enabled. INIT RPM5 “VSG MIN RPM” to “VSG MAX RPM” Select the cruise switched VSG initial RPM.
RPM INCR5 1 to 255 RPM Allows the selection of the cruise switched VSG RPM increment. CRZ/ENG BRK4 YES, NO or N/A Allows the engine brake to be used while on cruise control if the vehicle exceeds the cruise set speed. Engine brakes must also be configured. CRZ/ENG BRK MPH6 1 to 7 MPH or N/A Vehicle speed above the current set speed that must be reached before the engine brake will activate the low level retardation.