Detroit Diesel — Engine and Vehicle Options

DDEC Engine Parameters Engine Droop Options The following table lists the engine droop options that may be reprogrammed. Engine and Vehicle Options The following table lists the reprogrammable Engine and Vehicle Options param- eters. Detroit Diesel Application User’s Manual 179 Parameter Range Description • VSG DROOP RPM (STANDARD) • THROT DRP RPM (MARINE) 0 to LSG DROOP RPM Indicates the variable speed governor droop in RPM that is programmed in the DDEC calibration. For marine engines, this is the amount of throttle droop. LSG DROOP RPM 0 to MAX Droop RPM The limiting speed governor droop.

Parameter Description UNIT # 10 characters - Allows the reprogramming of the vehicle unit number identification. V 17 characters - Allows the reprogramming of the vehicle identification number. IDLE ADJUST Typically - 25 to 150 RPM - Allows small adjustment of the idle RPM. DYNAMIC BRAKING YES, NO or N/A - Allows the Dynamic Braking feature to be enabled. Requires that the ECM is configured for engine brakes and fan controls. ENG BRK/SER BRK YES, NO or N/A - Allows the engine brake to be activated when the brake pedal is pressed. Requires engine brakes to be configured. ENG BRK MIN (0 to 40 MPH), (0 to 64 KPH), or N/A - Allows program- ming of the minimum brake operation RPM.

HALF ENGINE Indicates how half engine mode will depend on tempera- ture. Reprogramming may be disabled as part of the ECM calibration off, on, if cold.