DDEC Marine Controls Parameters Marine Controls Data List The following table lists all data list parameters and their current values for the DDEC Marine Controls. Detroit Diesel Application User’s Manual 195 Parameter Range Description ACTIVE CODES YES or NO Indicates the presence of a condi- tion(s) that is not normal. Only available for version 3.0 marine controls. ACTIVE CSIM 1-6 Indicates which control station is active. ACTIVE CSIM OK YES or NO Indicates whether the active CSIM is still responding properly. BOW THRUSTER YES or NO Indicates the presence of a Bow Thruster. Only available for version 3.0 marine controls.
CDES SNCE PWER UP YES or NO Indicates that current or active codes have been stored in the ERIM memory. These codes are deleted when ignition is turned off. CSIM ACTIVATED YES or NO Indicates if a control station has been activated since power-up. CSIM LOW VOLT YES or NO Indicates the presence of a low voltage condition on the active CSIM. CSIM BATTERY V 0 to 99.9 Displays the active CSIM’s current battery voltage. *ERIM MODE (*See page 201 for ERIM Mode display details.) – Indicates the current operating mode of the Engine Room Interface Module. ERIM BATTERY V 0 to 99.9 Displays the ERIM’s current battery voltage. Only available for version 3.0 marine controls.
EXIT SYNC MODE YES or NO Indicates that sync mode is being exited. FWD DRAG DOWN YES or NO Indicates the current status of the reverse drag down mode.