DDEC Marine Controls Parameters Detroit Diesel Application User’s Manual 203 Parameter Description AUX COMM-LINK LOSS Loss of auxiliary communications link. ERIM EEPROM ALERT ERIM EEPROM write error. ERIM M1 ALERT Port microprocessor error. ERIM M2 ALERT Starboard microprocessor error. ERIM NOT DDEC3 ALERT ERIM is not of upgraded software. ERIM DIAG ALERT Internal error detected in system. EXIT SYNC QUAL ALERT Occurs when operator exits sync mode and does not qualify follower throttle. BACKUP PANEL ACTIVE System is being controlled by the back up throttle. PORT J1708 COMM LOSS Loss of all communications on the port link. PORT ENGINE STOPPED Port engine not running.
PORT POT OUT OF RANGE Port throttle potentiometer out of range. PORT THRT QUAL ALERT Unexplained loss of throttle qualification on Port throttle. PORT GEAR QUAL ALERT Unexplained loss of qualification on Port gear. Port GEAR COMM loss Port gear not responding. PORT GEAR LOW VOLTS Low voltage supply at Port gear. PORT GEAR HI LOAD Loading on Port gear actuator is higher than normal. PORT GEAR NOT @ NEU POS Port gear not in neutral when commanded to be in neutral PORT GEAR NOT @ NEU POS Port gear not in neutral when commanded to be in neutral. PORT GEAR NOT @ REV POS Port gear not in reverse when commanded to be in reverse.