Komatsu — EVERY 1000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE REMARK CHANGE OIL IN SWING MACHINERY CASE WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil hole (B), then turn the drain valve to the OPEN position. 7. Install air bleed plug (1). 4 - 71 Operate the mach ine after halting for more than 5 minutes t o eliminate bu bbles in the oil insi 12. Check for oil l eakage and wipe of f any spilled emperature to go d own before performing this operatio Refill capacity: 20 liters (5.28 US g 1. Remove cove r (A) of the inspecti (Only demoliti on specification ma 2.

Set a contain er under drain valve (P) under th e machine body to catch the o il. valve (P) under the body, drain the oil, then ain valve again. 3. Loosen drain tighten the dr When drain ing the oil, first pull hose (2) out from inspection 4. Remove dipst ick (G) and air bledi ng plug (1). 5. Add the repla cement amount of oi l through the insertion guide for dipstick (G 6. Check the oil SWING MAC