. OPERATION MACHINE OPERATIONS AND CONTROLS Checks Before Starting Check Coolant Level, Add Coolant WARNING is of If 3 - 56 Always check t he items in this section before s tarting the engin e each day Do not open th e radiator cap unl ess necessary. W ait for the engine to cool down before checking the c oolant in the sub-tank. Immediately af ter the engine is s topped, the coola nt is at a high temperature and the radiator is under high internal pressure. If the cap is re moved to check th e coolant level in this condition, the re is a hazard of burns. Wait for the temperature to go down, then tur n the cap slowly t o release the pres sure before removi ng it. 1.
between th e FULL and LO W marks on ra diator sub-tank ( (Shown in t he diagram on the right). If the water leve l is lo add clean a nd soft water thr ough the water filler of sub-tank ( to the FULL After addin level. g coolant, tighten the cap securely. If the sub-t coolant. Aft ank (1) is emp er inspecting, r ty, there is pr epair any probl obably leakage em immediately. there is no problem, check the coolant lev el in the radiator. the coolant level is low, add coolant to the r adiator, then fill th sub-tank (1