Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Engine Oil Pan, Add Oil WARNING is stopped and may cause serious burns. Wait for the oil 3. Fully insert dipstick (G) into filler pipe (F), then remove it. 3 - 57 Parts mmediat the engin temperature to go do wn before performing this operation 1. 2. Open e Remov ngine h e dipstic ood. k (G) and wipe the oil off with a cloth. 4. The oil level sh ould be b etween the H a nd L marks on di pstick ( I G). f the o il level is below th e L mark, add oil through oil fill er (F). 5. I f the o il level i s above t achine.

he H mark, remove cover (1) at the bottom of the m Loose n drain pl ug (P), drain the excess oil, then check the oil l 6. I 7. I evel a f the o nstall gain. il level is cover (1) correct, tighten the oil filler cap securely. . e hood. 8. Close t he engin REMARK achine is at an angle, reposition it to level before checking. If the m achine is at an an gle, reposition it to lev el before checking. When c hecking the oil lev el afte r the en gine has been op erated, allow the engine to co ol for 15 minutes before checkin g.