Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Check Fuel Level, Add Fuel WARNING 1. Insert the key into engine starting switch (1) and turn it to the ON position to light up monitor (2). Position of tip of float gauge (G) when fuel tank is full: Approx. 105 mm (4.1 in) from top surface of fuel tank fuel filler 3 - 58 When adding fuel, never spill the fuel or let it overflow. It will cause fir If any fuel has spilled, wipe it up completely. If fuel has spilled over so il or sand, remove that soil or sa Fuel is highly flammable and dangerous. Never bring flames near f uel to the 2. Check fuel gauge (3) f or the remaining fuel amount 3.

If the level is low, open the soil cover, open fuel fille r cap (F ) of the fuel tank, then ad highest position. Fuel tank capacity: 12 d fuel until float gauge (G) rises to the 5 liters (33.03 US gal) the 4. After adding fuel, push float gauge (G) straight dow n with f uel filter cap (F). Be carefu tab (4) of fuel filler c securely. l not to get float gauge (G) ca ught in the ap (F), and tighten fuel filler cap (F) (F)