. OPERATION MACHINE OPERATIONS AND CONTROLS Suspension Seat (If equipped) (B) Adjusting reclining upright is 3 - 64 (A) F Move lever (1) to the upper, s et the operator's seat at the de positi on, then release the lev Fore-and-aft adjustment: 50 REMA RK The s eat can be reclined more when the seat is pushed to the The a mount of reclining decre ases as the seat is pushed bac when moving the seat back, return the seatback to the u on. positi Pull up lever (2) and set t he backrest to a position th n release the lever. comfortable for operation, the Sit wi th your back against the seat backrest when adjusting. If back is not against the backre st, the backrest may suddenly forwa rd.
(C) A djusting armrest angle pring up by hand approx. 90°. Armre st (3) can be made to s In ad dition, by turning the dial (4) at bottom of armrest by han d it is possible to make fine verti cal adjustment of the armre st angle. °. Armre st adjustment angle: 25 REMA RK If the seat back is tipped to th e front without raising the armr est (3), the armrest will rise auto (D) O verall fore-and-aft adjus tment of seat Move lever (5) to right. After t he seat is set to the desired pos ition, release the lever (5). In this case, the operator's seat, left and right control lev ers, and lock lever all slide toge Fore-and-aft adjustment:
100 (E) A djusting suspension al to your own weight by turning knob (6) under the operator's seat. o 50 to 120 kg (110 to 265 lb). Adjus t the weight adjusting di al to your own weight by turnin g knob (6) under the operator's s The w eight can be adjusted t o 50 to 120 kg (110 to 265 lb). If you want to make the seat s ofter, turn the weight adjustmen t to a lower weight; if you want to make the seat harder, adjus t to a higher weight. Wh en operating on uneven surfac es, adjust t he seat to a harder se tting.