Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Wind-in Type Seat Belt (If equipped) WARNING replace the seat belt. the back of the belt. Fastening and Removing Seat Belt 3 - 68 Before fitting the seat belt, check that there is no p roblem in the belt mount bracket or m ounting belt. If it is wor n or damaged, Even if no pro blem can be seen i n the belt, replace the se at belt ever y 3 years.

The date o f manufacture of the b elt is shown on Always wear the seat belt during operation Fit the seat b elt so that it is not t wiste This seat belt has a wind-in device, so it is not necessary t o adjust Fastening seat b elt Hold grip (2) a nd pull the belt out from wind-i n device (1 ), check t hat the belt is no securely. When doing t locked. t twisted, then insert tongue (3) into buckle (4) his, pull the belt lightly to check that it is properly insert (4) Removing belt Press button ( 5) in buckle (4), a nd re move t ongue (3) from buckle (4). The belt is aut omatically wound in, s o hold grip (2) a nd return the belt slowly to wind-in device (1) .