. OPERATION MACHINE OPERATIONS AND CONTROLS Operations Before Starting Engine WARNING When standing up from the operator's seat, always set the lock lever to the LOCK position, regardless of whether the engine is running or stopped. REMARK The engine does not start, if the lock lever is not in the LOCK position. switch (2), turn the key to the ON 3 - 69 1. Check the lock lever (1) i 2. Check that each control l ever is in the NEUTRAL position. 3. I position, then carry out th 1) The buzzer will soun d for approx.
1 sec, and the following monitors and gauges Charge level moni Engine oil pressur Engine coolant tem Engine coolant tem Fuel level monitor Fuel level gauge ( Swift deceleration Engine pre-heatin If the monitors or gau not sound, there is pr please contact your K After approx. 3 sec gauges will remain o Charge level moni Engine oil pressur Engine coolant tem Fuel level gauge ( will light up for approx. 3 sec ges do not light up or the buzzer does obably a blown bulb or disconnection, omatsu distributor for repair. onds, the following monitors