COMPONENT OPERATION / Swing Device SWING REDUCTION GEAR The swing reduction gear is a two-stage planetary re- duction gear. Ring gear (3) is monolithically built with the housing bolted to the upperstructure and does not allow to ro- tate. Shaft (1) of the swing motor turns first stage sun gear (9), whose turning torque is transmitted to second stage sun gear (7) through first stage planetary gear (2) and first stage carrier (8). Second stage sun gear (7) turns shaft (5) through second stage planetary gear (4) and second stage carrier (6). Shaft (5) is engaged with the internal gear of swing bearing fixed to the undercarriage in order to swing the upperstructure.
1 9 2 8 3 7 6 4 T1V1-03-02-018 1 - Shaft (Swing Motor) 4 - Second Stage Planetary Gear 7 - Second Stage Sun Gear 5 2 - First Stage Planetary Gear 5 - Shaft 8 - First Stage Carrier 3 - Ring Gear 6 - Second Stage Carrier 9 - First Stage Sun Gear T3-2-2