COMPONENT OPERATION / Swing Device SWING MOTOR The swing motor consists of swash plate (9), rotor (12), valve plate (13), housing (11) and swing parking brake (springs (1), brake pistons (2), plate (3), friction plate (5) and swing parking brake selection valve (4)). Shaft (8) is splined to rotor (12) into which plunger (6) is inserted. When pressure oil is supplied from the pump, plunger (6) is pushed. Shoe (10) at the top of plunger (6) slides over swash plate (9) so that rotor (12) rotates. The top of shaft (8) is splined to the first stage sun gear of swing reduction gear. Therefore, the rotation of shaft (8) is transmitted to the swing reduction gear.
T1V1-03-02-008 1 - Spring 5 - Friction Plate 8 - Shaft 11 - Housing 2 - Brake Piston 6 - Plunger 9 - Swash Plate 12 - Rotor 3 - Plate 7 - Retainer 10 - Shoe 13 - Valve Plate 4 - Swing Parking Brake Selection Valve T3-2-3 13 12 11 10 9 8 1 2 3 4 5 6 7