hitachi — Solenoid Valve

COMPONENT OPERATION / Others (Upperstructure) SOLENOID VALVE The solenoid valve consists of the solenoid valve unit for pump and valve 4-spool control and the 2-spool solenoid valve unit (optional) for auxiliary flow rate control. 4-Spool Solenoid Valve Unit Controls the control valve and the valve in travel motor by the signal from MC (main controller). (Refer to Control System / SYSTEM.) The 4-spool solenoid valve unit consists of proportional solenoid valves (SC, SF, SI and SG). SC: Control the arm regenerative valve and arm 2 flow rate control valve (switch valve) in control valve SF: Control the digging regenerative valve in control valve SI:

Control the travel motor swash angle control valve SG: Increase pressure of the main relief valve in control valve 2-Spool Solenoid Valve Unit (Optional) The 2-spool solenoid valve unit consists of the auxiliary flow combiner valve and auxiliary flow rate control solenoid valve. The auxiliary flow combiner solenoid valve is an ON / OFF solenoid valve. When the front attachment is selected by using the monitor unit, the auxiliary flow combiner solenoid valve is turned ON and shifts the auxiliary flow combiner valve in control valve. (Refer to Control System / SYSTEM.) The auxiliary flow rate control solenoid valve is a proportional solenoid valve.

The auxiliary flow rate control valve (switch valve) in control valve is shifted by the signal from MC. SC SF SI SG T1V1-03-07-007 Auxiliary Flow Combiner Solenoid Valve Auxiliary Flow Rate Control Solenoid Valve T1GL-03-10-002 T3-7-3