With the Manual shift mode, gears are not shifted automatically. To return to the Auto shift mode, operate the change lever to "A" side, and make sure that the shift indicator shows "A". Never leave the driver’s seat with the engine running and the change lever in "D" or "R". The vehicle may move. Before you leave the driver’s seat, be sure to move the change lever to "N" and apply the parking brake fully. NOTE (Continued) Shift gears to appropriate positions. When you attempt to shift to an inappropriate position, the warning buzzer beeps to indicate that the gear will not be shifted.
CAUTION NOTE [Manual shift mode] To shift gears with the Manual shift mode, move the change lever from "D" position to the desired gear position by "+" (upshift) or "-" (downshift). At this time, make sure that the shift indicator shows the desired gear position. In conjunction with this, the clutch is automatically disengaged, the gear is engaged, and then the clutch is automatically engaged upon completion of the gearshift operation. This step applies both for shift-up and shift-down. [6 speed] - 4–8 - [Auto shift mode] When you move the change lever from "N" to "D" position, the vehicle runs with auto gearshift. At this time, make sure that the shift indicator shows "A".
In a continuous steep uphill, it may be easier to drive with the Manual shift mode, which allows the vehicle to drive in a constant gear position, than the Auto shift mode. It is advisable to select the Manual shift mode in such situations. How to shift the gears NOTE DRIVING