DRIVING Be sure to apply the brake when stopping the vehicle on a grade. If you depress the accelerator pedal to make creep phenomenon stronger to keep the vehicle stopped, it will cause trouble. It is advisable to move the change lever to "N" position when you stop the vehicle to wait at stoplights etc. for fuel efficiency. CAUTION NOTE 1. Depress the brake pedal with your right foot to slow down the speed till the vehicle stops. Specific shift operation is not necessary. After the vehicle stops, the gear is shifted to a starting gear position automatically. 2. Move the change lever to "N" position while the vehicle is stopped.
If the vehicle is to be stopped for a long period, apply the parking brake. Do not keep depressing the accelerator pedal with the brake applied and the change lever in "D" or "R" position when the vehicle is stopped. It will cause trouble. If you leave the driver’s seat, be sure to move the change lever to "N" and make sure the shift indicator shows "N", and then apply the parking brake fully. How to stop the vehicle - 4–9 - Running the vehicle with an inappropriate gear position will sound the warning buzzer. Shift- down to an appropriate gear position, since it causes trouble if you continue to run the vehicle with this condition.
Shifting down to an appropriate gear position will stop the warning buzzer. Abrupt operation of the accelerator pedal immediately after shift operation will cause rough motion of the vehicle as well as cause trouble. Operate the accelerator pedal slowly taking plenty of time. Running with ECONO mode will improve fuel efficiency. If you need a delicate speed adjustment such as driving in reverse to dock to the platform, adjust the vehicle speed only with brake pedal operation (without accelerator pedal operation) utilizing creep phenomenon for smooth movement of the vehicle. NOTE (Continued)