Isuzu — 4-5 Operating methods for Smoother

This switch is used to move the vehicle to a safe place when a trouble occurs in the electrical system of the Smoother system. Keep this switch "OFF" and the emergency shift switch in "N" normally, and do not operate this switch while the vehicle is running. Follow the steps below to evacuate from the situation when a trouble occurs in the electrical system of the Smoother system. 1. Keep the brake pedal securely depressed with your right foot, and make sure the change lever is in "N" position. Keep the emergency switch covered normally. How to use the Smoother emergency switch You cannot move the Smoother vehicle by push-start or with the starter.

If the engine stalls and restart is impossible, move the change lever to "N" position. And push the vehicle to a safe place to evacuate if the shift indicator shows "N". If it shows other than "N", use the emergency switch to change to "N" and then push the vehicle to a safe place to evacuate. - 4–16 - When the Smoother warning light comes on while the vehicle is running, immediately stop the vehicle in a safe place. Immediately contact your Isuzu dealer for an inspection if the warning light does not go off. Smoother emergency switch is used to evacuate in an emergency. Keep this switch "OFF" normally. Do not operate this switch especially when the vehicle is running.

With the Smoother emergency switch "ON", the Smoother warning light blinks and the buzzer stops. You cannot make gearshifts with the Smoother emergency switch "ON". If you wish to change the gear to a starting position, use the emergency shift switch. In case of Smoother failure CAUTION DRIVING