DRIVING You may switch between the 2WD (rear wheel drive) and 4WD (four wheel drive) depending on the road surface conditions. 4WD system operation is effective when you drive on sandy, muddy, or uphill roads requiring extra torque. Driving in the 2WD mode is recommended when you drive on dry and normal roads. The 4WD type vehicle, which has excellent off-road running performance, is not a specific for off-road driving use after all. It should be used in the same way as other ordinary-purpose vehicles.
PART TIME FOUR WHEEL DRIVE (4WD) SYSTEM OPERATION 4WD After moving the vehicle to a safe place, immediately turn the emergency main switch to "OFF", turn the emergency shift switch back to "N", and cover the switch. 5. Release the parking brake, release the brake pedal, and slowly depress the accelerator pedal to start the vehicle. You cannot make gearshifts to other than the selectable gear position (1st or reverse) of the shift switch. CAUTION - 4–17 - NOTE 2. Uncover the Smoother emergency switch, and press the emergency main switch to "ON". Make sure that the Smoother warning light blinks. At this time, make sure that the emergency shift switch is in "N" position. 3.
Securely apply the parking brake, holding the brake pedal securely with your right foot, and turn the starter switch to "START" position to start the engine. 4. With the brake pedal securely depressed, turn the emergency shift switch to "1" or "R". At this time, make sure that the shift indicator shows "1" or "R". Smoother emergency main switch Cover Reverse Forward Smoother emergency shift switch