1. Loosen the oil filter by turning it counterclockwise with a filter wrench. 2. With a rag wipe clean the fitting face of the oil filter so that the new oil filter can be seated properly. Oil filter Main oil filter (on models with partial- flow oil filters) 1. Drain the engine oil by loosening the drain plug on the filter cover. 2. Loosen the oil filter by turning it counterclockwise with a filter wrench. 3. With a rag wipe clean the fitting face of the oil filter so that the new oil filter can be seated properly. - 7–22 - SERVICE AND MAINTENANCE 4. Allow the element to dry in a well ventilated place. To dry the element quickly, use an electric fan.
Avoid use of compressed air or open flames for quick drying. It is recommended that a spare element be used as it normally takes 2 to 3 days for natural element drying.