Isuzu — 7-18 Periodic maintenance

SERVICE AND MAINTENANCE The oil filter body should also be drained when changing engine oil. Discard the filter element and install a new one regularly. 1. Drain engine oil by loosening the drain plug on the filter cover. 4J 2. Loosen the oil filter by turning at counterclockwise with a filter wrench. 3. With a rag wipe clean the fitting face of the oil filter, so that the new oil filter can be seated properly. Partial-flow oil filter OPT 3. Lightly oil the O-ring and screw in the oil filter until the sealing face is fitted against the O-ring. Using the filter wrench, tighten the filter: Check the level of the oil in the engine and replenish it to the specified level as necessary.

Start the engine and check for leaks at the oil filter. It is strongly advisable to use an Isuzu genuine oil filter assembly for replacement. CAUTION - 7–23 - 4J 1 . 1/8 turns 4H 5/6 turns