3. Lightly oil the O-ring. Reinstall and turn the filter assembly clockwise carefully to prevent the fuel from spilling. Turn it until the O-ring is fitted against the sealing face of the filter cover. Further turn the filter assembly 1/3 to 2/3 of a turn with a filter wrench. CAUTION 3 1. Loosen the fuel filter by turning it counterclockwise with a filter wrench. 2. With a rag wipe clean the fitting face on the upper cover, so that the new fuel filter can be seated properly. - 7–24 - Fuel filter 4J 1 SERVICE AND MAINTENANCE 4. Lightly oil the O-ring and screw in the oil filter until the sealing face is fitted against the O-ring. Turn 1-1/4 turns further with a filter wrench.
Check the level of the oil in the engine and replenish it to the specified level as necessary. Start the engine and check for leaks at the oil filter. It is strongly advisable to use an Isuzu genuine oil filter assembly for replacement.