Isuzu — 7-18 Periodic maintenance

10. When the engine has been cooled, check filler neck for water level and replenish if required. Should extreme shortage of coolant be found, check the coolant system and reservoir tank hose for leakage. 11. Fill the coolant in the reservoir tank up to "MAX" line. loosen or remove the radiator cap. open the radiator cap, put a piece loosen the cap slowly to reduce the 8. After tightening the radiator cap, warm up the engine at about 2,000 rpm. Set heater adjustment to the highest temperature position, and let the coolant circulate also into the heater water system. 9.

Check to see that the thermostat has opened through the needle position of the water, conduct a 5-minute idling again and stop the engine. When the coolant is heated to a high temperature, be sure not to Otherwise you might get scalded by hot vapor or boiling water. To pressure when the coolant has of thick cloth on the cap and WARNING - 7–32 - become cooler. SERVICE AND MAINTENANCE