Isuzu — 7-18 Periodic maintenance

SERVICE AND MAINTENANCE 1. Depress the brake pedal as far as possible. 2. Repeat above Step 1 five times to automatically adjust the brake drum clearance. With auto-adjuster type 7. Repeat the above adjustment procedures for adjusting the brakes on the remaining wheels. - 7–35 - 1. Jack up a wheel clear of the ground. 2. Then set a supporter for safety. 3. Remove the rubber plugs from the brake adjuster holes in the front and rear faces of the brake back plate. 4. Insert a screwdriver into adjuster hole and turn the adjuster in the direction of the arrow until the wheel can not turn. 5. Back off the adjusters 5 to 6 notches. 6. Replace the rubber plugs in position.

To adjust front and rear brakes, proceed as follows: Without auto-adjuster type