SERVICE AND MAINTENANCE 1. Install the fluid pipe and hose securely specified automatic transmission fluid. 2. When the fluid reservoir is filled to the specified level, allow 2 or 3 minutes. After refilling regularly check and keep fluid reservoir replenished as necessary to prevent air from entering the hydraulic system. NOTE Refilling: 1. Jack up the front wheels until they are clear of the ground. 2. Remove the fluid pipe between the steering unit and the fluid reservoir, and the fluid hose between the pump and the fluid reservoir. 3.
When draining is completed, remove the remaining fluid within the hydraulic system by turning the steering wheel until it stops in both directions several times. Changing power steering fluid - 7–69 - Draining: Use the correct viscosity for the existing ambient temperature. Limited Slip Differential Lubricant Additive 4oz (112 g) Quantity Be sure to use the Limited Slip Differential Lubricant Additive mentioned above, otherwise a chattering noise and/or excessive vibration may occur when turning. NOTE Quantity Limited Slip Differential Lubricant Additive 4oz (112 g)