Lubricate the following points with multipurpose type grease. King pins (4 points). Greasing points It is suggested that the vehicle be brought into an Isuzu dealer when the above operation becomes necessary as the operation calls for disassembly and reassembly operations. Repacking the front and rear hub bearing with grease - 7–72 - SERVICE AND MAINTENANCE Air bleeding from the brake fluid line (in the master cylinder, wheel cylinder, etc.) may be performed only after air is bled from the hydro booster and with the engine running. Air cannot be bled from the brake fluid line if the engine is not running.
When bleeding air from both the hydro booster and the brake fluid line, always bleed air from the hydro booster first per steps (1) through (9) above. CAUTION