CONTROLS AND INSTRUMENTS To set the hours: While holding the AM/FM button down, push the " " button to set the hours. To set the minutes: While holding the AM/FM button down, push the " " button to set the minutes. When adjust the clock, the AM/FM button should be pressed simultaneously with the preset button (No. 3). When the minute display is less than "30", the minute display changes to "00". When the minute display is "31" or more, the minute display changes to "00", and the hour display carries up. Digital clock As this button pressed, the auto search starts towards higher frequency from that point.
When a station is received, the unit stops searching and receiving the station for 5 seconds. Then it resumes the auto search. During the 5 seconds in which the unit is receiving the searched station, if the button is pressed, the unit will cancel the scan mode and continue receiving the current station. - 2–69 - Scan button Pressing the button will alternately select either the AM or FM. AM/FM band selector