Isuzu — 2-54 Radio

When the eject button is depressed, the cassette tape is ejected. When the power switch is on, the unit is switched to the radio mode. 2. Eject button When "FF/REW" buttons are pushed, the buttons are locked for fast feed and rewind of tape. Specifically push the button on the same direction as the indicated on the display, the tape will be fast fed. If the button on the other side is pushed, the tape will be rewound. To release the "FF" or "REW", push another direction button lightly. When one program has almost come to an end, it is automatically switched over to the reverse side of the tape. Pressing the "FF/REW" buttons at once, it is possible to change the playing sides of the tape.

- 2–70 - FF/REW button CONTROLS AND INSTRUMENTS As the alarm button is pressed for 1.5 seconds or more, the alarm set mode is turned on. During the alarm set mode, alarm indicator is indicated on the display. The tuning buttons are used to set the alarm. When it reaches the set time, the alarm rings. To stop the alarm, press the button. If any button is not pressed when the alarm begins to ring, the alarm continues to rings for 3 minutes. To select ON/OFF of alarm, push the alarm button. While the alarm is ON, the alarm symbol appears on the display. To make sure of the set time, press the alarm button for 1.5 seconds or more. Then push the alarm button to select the current time mode.

Alarm button