OPERATING INFORMATION Upper limit for Continuous Run Heat Mode Lower limit for Continuous Run Cool Mode Configuration of the minimum comfort zone Configuration of the minimum Cool Mode temperature limit Configuration of the maximum Heat Mode temperature limit Password modification Password Entry The password is displayed in two segments. The first segment is “XX”, and the second segment is “--XX”. All four values must be correct to enter the protected menu. To enter the password : NOTE: This screen is only displayed for two seconds if no buttons are pressed. The correct password must be entered quickly. 1. Press until the icon is displayed. The first digit will flash. 2.
Use or to enter the first digit. 3. Press and the second digit will flash. 4. Use or to enter the second digit. 5. Press and the "-" icon displays with the third digit. 6. Use or to enter the third digit. 7. Press and the fourth digit will flash. 8. Use or to enter the fourth digit. 9. Press and the password will be compared to the one in memory. If the wrong password is entered or no buttons are pressed in two seconds, the display will return to the Main Display (vehicle interior temperature). NOTICE: DDC Technical Service must be contacted for the backdoor password. You must have ready the password code that is flashed when the wrong password is entered, when contacting technical service.
20 All information subject to change without notice. Copyright © 2016 DETROIT DIESEL CORPORATION DDC-SVC-MAN-0019