. OPERATION EXPLANATION OF COMPONENTS When operating the gear shift lever, set it securely to the desired position. If it is not securely in position, the shift position display on the panel may go out and the transmission system caution lamp may light up. Before shifting between forward and reverse, stop the machine completely and then run the engine at low idle. When starting the engine, if the gear shift lever is not at the N (neutral) position, the engine will not start.
When the starting switch is at the ON position, if the gear shift lever is not at the N (neutral) position, the gear shift lever position pilot lamp will flash, the central warning lamp will light up, and the alarm buzzer will sound. If the parking brake is applied or the gear shift lever is not at the N (neutral) position, the central warning lamp will light up and the alarm buzzer will sound. If the gear shift lever is set to any position other than N (neutral) when the dump lever is at a position other than FLOAT or the body is still raised, the central warning lamp will light up and the alarm buzzer will sound.
The gear shift lever must not be returned to the N (neutral) position while traveling. Before operating the gear shift lever from N to F or R, release the accelerator pedal to reduce the engine speed to low idling. When moving the shift lever from the N (neutral) position to the R (reverse) position or from the D positions to position 6, press the lock button on the shift lever before moving it. 3 - 41 6 - L p osition These positions are u sed in places where it is difficult to travel at high speed, or wh en traveling on soft groun d, or when startin g the machin e off on a slope whe n it is loaded.
They are also use when going downhill if it is needed to use the braking force of t he engine. While the dump body is ra ised, the transmission is fixed to the 1s t gear and is not c hanged . Keep the dump b ody lowered during t ravel The speed ranges for e ach position are as follows. Position Speed range Max. speed [km/h (MPH)] 6 1st torque converter - 6th direct 52.4 (32.6) 5 1st torque converter - 5th direct 38.5 (23.9) 4 1st torque converter - 4th direct 28.7 (17.8) 3 1st torque converter - 3rd direct 21.3 (13.2) 2 1st torque converter - 2nd direct 15.8 (9.8) L 1st torque converter - 1st direct 10.3 (6.4)