Komatsu — CONTROL LEVERS AND PEDALS

. OPERATION EXPLANATION OF COMPONENTS DUMP LEVER CAUTION To prevent damage to the dump body through vibration from the road surface, always lower the dump body before traveling. RETARDER CONTROL LEVER CAUTION The retarder must not be used as a parking brake. DUMP LEVER LOCK KNOB WARNING This device (6) is used to lock the dump lever. 3 - 42 This lever (4) is used to operate the dump body. dy stops and is held in position. (a) RAISE (b) HOLD: The dump bo dy stops and is held in positio (c) FLOAT: The dump b ody moves freely under extern al forc (d) LOWER T position when traveling. Always set to the FLOA Use this lever (5) to ope rate the retarder when travelin g downhill.

The more the lever is pul led in direction (a), the greater the braking force becomes. erated, the retarder pilot lamp lights up. When the retarder is op erated, the retarder pilot lamp l ights u When leaving the opera tor's seat, always apply the pa rking b rake. When carrying out inspecti on of the machine with the dump body ra ised, always set the dump lever t o the HOLD position, lock with the dump lever lock knob, then use the bo dy pivot pin. To set to the FREE posit ion, pull the lock knob up until it stops, then turn it to lock it in positio n. ition, pull the lock knob up, then turn it to To set to the LOCK pos en turn release the lock.

The k nob will be pushed in by the f orce o f the spring, and the lock will b e applied. After doing this, ch eck tha t the dump lever is locked.