Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Removal and installation of operator cab glass (stuck glass)

UEN00665-00 50 Disassembly and assembly 4) Remove the release tape of dam rubber on the glass adhesive side. 5) Apply adhesive (15) to the outside of dam rubber (6) of the operator's cab. a Apply adhesive (15) with dimensions (s) and (t) for dam rubber (6) of oper- ator's cab (8). q Dimension (t): 15 mm a Apply adhesive (15) higher than dam rubber(6). a Apply the adhesive evenly with same height level. q Dimension (s): 10 mm 7. Install the window glass. 1) Install window class (9), matching it to the lines of the positioning tapes drawn in step 5. a Since the window glass cannot be removed and stuck again, stick it with utmost caution.

a Stick the glass within 5 minutes after applying the adhesive. 2) After sticking window glass (9), press all around of it until it sticks to the dam rubber closely. a Press the corners of the window glass firmly. a Apply adhesive (15) additionally to additional dam rubber(6a) of right side window glass and additional dam rubber(6b) of door lower window glass. 12 PC210, 230, 240-8