50 Disassembly and assembly UEN00665-00 a When positioning front window glass (4), set its horizontal position to the frame width. And set its vertical position to make the height difference (p) between the frame top and the front window glass 3 mm. 2) Cut the tip of the adhesive nozzle (14) so that dimensions (q) and (r) will be as fol- lows. q Dimension (q): 10 mm q Dimension (r): 15 mm 6. Apply adhesive. a Use either of two types of adhesives according to the season. 3) Set adhesive cartridge (12) to caulking gun [7]. a An electric caulking gun is more effi- cient. 2 Adhesive (Apr. to Oct.): Sunstar penguine seal 580 super “S“ 2 Adhesive (Oct. to Apr.):
Sunstar penguine seal 580 super “W“ a The using limit of the adhesive is 4 months after the date of manufacture. Do not use the adhesive after this limit. a Keep the adhesive in a dark place where the temperature is below 25°C. a Never heat the adhesive higher than 30°C. a When reusing the adhesive, remove the all hardened part form the nozzle tip. 1) Break aluminum seal (13) of the outlet of adhesive cartridge (12) and install the nozzle. PC210, 230, 240-8 11