Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Removal and installation of floor frame assembly

UEN00665-00 50 Disassembly and assembly Removal and installation of floor frame assembly 5. Disconnect ground (2). Special tools Removal 6. Disconnect the following PPC hoses from the travel PPC valve. The color of the band is; k Disconnect the negative terminal (–) of the battery before starting the work. q (3): Red k Collect the air conditioner gas (R134a). k If the air conditioner gas (R134a) gets inside one's eyes, it may cause blindness. Therefore, make sure to wear protective glasses when collecting or filling the gas. Collecting and filling work must be con- ducted by a qualified person. q (4): No color q (5): Green q (6): Blue a Prepare an oil sump. 7.

Disconnect top and bottom of connector (7). Top: P09 Bottom: P10 1. Turn the upper structure by 90 degrees. 2. Drain the engine cooling water. 6 Coolant: Approx. 21 l (PC210, 230) Approx. 20.4 l (PC240) 3. Remove the operator's cab assembly by refer- ring “Removal and installation of operator's cab assembly“. 4. Remove cover (1). 22 PC210, 230, 240-8 Symbol Part number Part name Necessity Q’ty N/R Sketch X1 799-703-1200 Service tool kit t 1 799-703-1100 Vacuum pump (100V) t 1 799-703-1111 Vacuum pump (220V) t 1 799-703-1121 Vacuum pump (240V) t 1 799-703-1401 Gas leak detector t 1