Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Removal and installation of floor frame assembly

50 Disassembly and assembly UEN00665-00 q Step 8 – 10 is optional (for breaker). 8. Disconnect the following PPC hoses from the PPC valve. The color of the band is; 20. Remove clamps (24) and (25). [*2] 21. Disconnect clamp (26). (If equipped) q (8): Yellow q (9): No color a Plug the hose to stop oil flow-out. 9. Disconnect connectors S11 (10) and S10 (11). 10. Disconnect connectors P13 (12) and V30 (13). 22. Disconnect connectors N10 (27) and AC01 (28). 23. Disconnect connectors ECU10 and ECU11 (29) from the air conditioner controller (ACCONT). 24. Cut tie-wrap (30) and draw in wiring harness (31). 25. Disconnect the clamp of wiring harness (32). 11. Disconnect ground (14).

From the left, T04,T05,T06,T07,T09,T10 12. Disconnect clamp (15). 13. Disconnect connector A08 (16) from the clip. 14. Disconnect connector P17 (17) from the air conditioner tube. 15. Remove the clamp and disconnect spacer (18). 16. Disconnect hose (19). a Check the connecting point. a Plug the hose to stop oil flow-out. a Disconnect the work equipment PPC at joint box side. 26. Disconnect connector H15 (33). 27. Remove grommet (34). 28. Move wiring harness (35) to the outside of the floor frame. a (SP) is made of sponge. 17. Disconnect hose (20). a Check the connecting point. a Plug the hose to stop oil flow-out. 18. Disconnect heater hose (21). a Check the connecting point. 19.

Remove mounting bolt (22) and disconnect air conditioner tube (23). [*1] PC210, 230, 240-8 23